DSP Robotics Support

Posted: **Mon May 28, 2018 10:17 am**

Hello. I found the COM PORT problem in the flowstone. Sending a continuous stream to the COM port causes the flowstone to crash. Can I receive data from the COM port in Ruby?

Posted: **Thu May 31, 2018 6:29 pm**

UPD: The problem is solved. The problem was in not a genuine usb-uart prolific converter. I replaced it with FTDI Chip.

DSP Robotics Support

Com port primitive always crash flowstone (solved)

Com port primitive always crash flowstone (solved)

Re: Com port primitive always crash flowstone